4mm Jump Ring (3.0mm ID) - 22 Gauge - GF16004

Style : 4mm Jump Ring (3.0mm ID) - 22 Gauge Finish: 14K Gold Filled Item Code: GF16004 Jump rings are the most common connector for jewelry making. They are made from many types of metals and range in size from 2mm and up. Jump Rings are a metal loop with a cut, the cut enables the sideways twisting of the ring in order to connect pieces. Adjusting a Jump Ring Never pull jump ring halves straight apart from each other because it will stress the metal and can cause breakage. To adjust or open a jump ring, use two pairs pliers, holding each side of the ring with pliers, slowly twist that side open just enough to complete your task. After you are finished, slowly twist the sides of the jump ring back into place pliers so the ends meet once again. Gold Filled jewelry is made by wrapping layers of solid gold (14K, 12K, or 18K) sheets around a base metal (usually brass). Unlike gold plated jewelry, gold filled jewelry actually has a measurable amount of gold in it. This process of adhering solid gold sheets makes for jewelry that does not tarnish, peel, chip or discolor. To be considered golf-filled, jewelry needs to contain a minimum of 5% gold. Taking care of gold-filled jewelry is not complicated. In most cases, water, mild soap, and a soft cloth are enough to clean it thoroughly. Avoid polishing unless necessary and pay particular attention to the remnants of lotions and perfumes, especially on necklaces and chains.